Protosynth MIDI

The Protosynth MIDI is a powerful MIDI prototyping platform that converts incoming MIDI events into electrical signals that make experimentation very simple!
SMT Amplify Me Clean

This is a small footprint SMT low voltage audio amplifier that is great for hobby level projects, instruments, and radios!
Hear Me

The Hear Me kit is an electret microphone amplifier kit with a line level output!
MixMe8 Module

This is a passive summing mixer which takes 8 inputs and puts out 1 output. We have used this in audio applications.
Analog Shift

This is a digital to analog converter. It takes a 7-bit digital value from 0000000 to 1111111 & converts it to a voltage between 0V to 3.3V
VU Meter Me

This is a volume unit (VU) meter which helps you visualize your music and audio projects in the shape of a mini speedometer.
AND8 Module

This is an array of 8 AND gates where one input is user-provided and the other input is provided by a serial to parallel shift register.
NPN8 Module

This allows you to control 8 NPN BJT transistors from one serial to parallel shift register to drive higher current loads.
TTL8 Module

This allows you to control 8 items (ie. LEDs) with one serial to parallel shift register to drive low current loads.
SMT Amplify Me

This is a small footprint SMT low voltage audio amplifier that is great for hobby level projects, instruments, and radios!
LED Candle Simulator

This is a candle simulator which simulates a flickering flame. It also simulates a flame blowing in a gentle breeze.
IR Transmitter Kit

This is 1/2 of an IR system. The transmitter communicates with your TVs or IR destination and can be controlled by multiple IR inputs.
IR Receiver Kit

This is 1/2 of an IR system. The receiver receives IR inputs and allows you to drive one or more IR transmitter kits.
MorePi Me

This is a Raspberry Pi shield providing you with 32 - 5V outputs controllable via software running on your Pi.
Blink Me

This kit is a great beginner's kit for learning about transistors, capacitors, and resistors to create a dual LED blinker.
Drink Me

This is a cute wine-shaped breathalyzer that allows you to visualize alcohol content with rising LED "bubbles"!
MIDI Out Me

This is a handy adapter that allows you to command and control MIDI devices via serial communication over a standard MIDI cable (5 pin DIN).
Jack Me

This gives you breadboard access to 2 stereo 1/4" jacks and speaker terminal. This can be used for stereo, mono, balanced, or unbalanced audio.
MIDI In Me

This allows you to connect a MIDI controller to your microcontroller. You can then use your MIDI controller to control whatever you want!
Count Me

This allows you to control 8 7-segment displays via shift registers with only 3 wires from your microcontroller of choice.
Turn Me

This is a rotary encoder kit that your microcontroller of choice can interface with and it is breadboard friendly for prototyping.
Under Me

This is a low pass filter kit that allows multiple rolloff frequencies below a range of 482 Hz to 3858 Hz to pass through.
Over Me

This is a high pass filter kit that allows multiple rolloff frequencies above a range of 482 Hz to 3858 Hz to pass through.
Shift Me (Toggle Switch)

With 6 wires and this kit, your microcontroller/computer will be able to read or write to any of the LED switches via a 74hc595 and 74hc165.
Shift Me (Momentary Switch)

With 6 wires and this kit, your microcontroller/computer will be able to read or write to any of the LED switches via a 74hc595 and 74hc165.
Amplify Me

This is a small throughhole low voltage audio amplifier kit that is great for hobby level projects, instruments, and radios!
Heart Me

This is an anatomically shaped heart with LEDs realistically showing 17 different cardiac rhythms . Great as an educational tool!